Waterproof protective case - 51x15x37cm - 1

Waterproof protective case - 51x15x37cm - 2

Waterproof case for a computer and accessories 51x15x37

From €455.00 to €629.00 excl. VAT (?)

The briefcase

Computer and accessories protected
Deep 15 cm format
Waterproof, 30 min immersion
Shockproof HPX shell
MIL-STD-810F certified
Lifetime guarantee

Color

Interior

Quantity (The briefcase)

Total : €676.80 excl. VAT

Delivery

✔️ In stock
Shipped within 15 days

The waterproof computer case 51x15x37 carries a laptop and its accessories in one rigid shell. Deeper than slim models, it holds the charger, mouse and drives alongside the computer. Its HPX resin shell takes on knocks, dust and immersion, with two Press & Pull latches and two padlock rings. Certified to MIL-STD-810F, it follows IT equipment into the field.

Waterproof computer case and accessories: the key points

→ Computer and peripherals: the 15 cm depth holds the laptop and its accessories together.
→ Tested waterproofing: the O-ring seal withstands a 30-minute immersion at 1 m.
→ Military-grade toughness: the HPX shell meets the MIL-STD-810F standard.
→ Secure closing: two Press & Pull latches and two 9 mm rings for a padlock or seal.
→ Vortex valve: the automatic purge valve rebalances pressure after altitude transport.
→ Choice of interior: pre-cut foam or a bare shell to divide yourself.

What the waterproof computer case 51x15x37 is for

The waterproof computer case 51x15x37 secures a full IT setup on the move, the laptop and everything that goes with it. Its depth holds the charger, mouse, cables and an external drive next to the computer.

It shields the whole set from knocks, water and dust, where a sleeve falls short. Technicians, mobile offices and project teams carry their valuable gear with confidence.

It belongs to the range of waterproof hard cases from SBE Direct.

Waterproofing, toughness and certifications of the computer case

The computer case uses an injection-moulded HPX resin shell, rigid and tough, weighing 2.59 kg empty and 3.27 kg with foam. The O-ring seal and stainless-steel hardware deliver waterproofing tested by immersion, 30 minutes at 1 m depth. It handles a temperature range from -28.9 °C to +60 °C. Its MIL-STD-810F, ATA 300 and FED-STD-101C certifications confirm performance for demanding professional use. The double-layer soft-grip handle eases carrying a loaded set. Each case carries a lifetime guarantee, excluding the gasket. For a slimmer laptop-only format, or a larger volume, look at the wider hard carrying case range.

Choosing the layout of the 51x15x37 computer case

Configuration	Best for	Benefit
With pre-cut foam (IM2370)	Cushioning computer and peripherals	Custom padding, no tools
No foam (IME2370)	Adding your own dividers	Free volume, lighter overall
9 mm rings + fixed support	Sealing to a table, safe or vehicle	Padlockable, traceable fixing

Rounding out IT protection in transit

A computer case works best with the right security accessories. The two 9 mm rings take a padlock or a seal, and let you attach the case to a fixed support, table, car boot or counter. The front name-tag holder identifies the setup at a glance.

To carry a slim laptop only, the 50x12x35 cm format suits better, while this 51x15x37 carries the computer and its accessories.

A microcase additionally protects small devices.

Waterproof computer case 51x15x37 FAQ

How does it differ from the 50x12x35 case?

Both carry a computer, but for a different purpose. The 50x12x35 is slim, at 12 cm deep, made for a laptop alone up to 17.3 inches. The 51x15x37 is deeper, at nearly 15 cm, and holds the computer with its accessories, charger, mouse and cables. Choose by what you carry with the computer.

What can the 51x15x37 case hold?

The internal volume is 46.2 x 30.7 x 13.2 cm, with an 8.9 cm base and a 4.3 cm lid. It holds a laptop and its peripherals, or a set of professional devices and accessories. The pre-cut foam holds each item in place.

Is the case waterproof and certified?

Yes. It withstands a 30-minute immersion at 1 m depth, thanks to the O-ring seal and the Vortex purge valve. Its MIL-STD-810F, ATA 300 and FED-STD-101C certifications confirm resistance for demanding professional use.

Can the computer case be padlocked?

Yes. Two Press & Pull latches close the case, and two 9 mm rings take a padlock or a seal. These rings also let you attach the case to a fixed support to secure the setup.