Waterproof protective case - 101x17x42cm - 1

Waterproof protective case - 101x17x42cm - 2

Waterproof protective case - 101x17x42cm - 3

Waterproof protective case - 101x17x42cm - 4

Waterproof protective case - 101x17x42cm - 5

Waterproof protective case - 101x17x42cm - 6

Long waterproof protective case 101x17x42 cm

From €674.00 to €934.00 excl. VAT (?)

The briefcase

• Long, low-profile format

• Rigid HPX resin shell

• O-ring seal and Vortex valve

• MIL-STD-810F certified

• 9 mm padlock lugs

Color

Interior

Quantity (The briefcase)

Total : €1,000.80 excl. VAT

Delivery

Guarantees

✔️ In stock
Shipped within 15 days

The long waterproof protective case 101x17x42 cm shields long, sensitive equipment in demanding environments. Its HPX resin shell, O-ring seal and Vortex valve keep out dust, water and impact. The long, low-profile format offers 92.7 cm of usable length for tripods, masts, profiles and bulky instruments. Certified to MIL-STD-810F, ATA 300 and FED-STD-101C, it secures every move of your kit.

Long waterproof case: the key points

Built for long loads, this case combines strong protection with easy handling. What sets it apart:

→Long, low-profile format: 92.7 cm of usable length, 15.2 cm deep.
→HPX resin: rigid yet light shell, stable from -29 °C to +60 °C.
→Active sealing: O-ring and Vortex valve equalise pressure after air transport.
→6 Press & Pull latches: fast opening and closing, even with gloves.
→2 reinforced 9 mm lugs: fit a padlock or a cable seal.
→MIL-STD-810F, ATA 300, FED-STD-101C: proven for professional transport.
→Lifetime guarantee, excluding the seal.

Long waterproof protective case: shielding bulky equipment

The long waterproof protective case answers a precise need: moving long items without folding or exposing them.

With 92.7 cm of internal length for 15.2 cm of depth, it holds what cube-shaped cases cannot: camera tripods, antenna masts, lighting stands, measuring rules, profiles and jigs.

The HPX resin shell stays rigid under load and absorbs field impact. This size rounds out the waterproof hard cases range where length matters more than volume, between the full hard carrying case range and the more compact formats.

Sealing and certifications for sensitive equipment

Sealing relies on two complementary features. The perimeter O-ring blocks dust and water when the case is closed. The Vortex valve automatically balances internal and external pressure: it prevents a vacuum effect after an altitude change or a temperature swing, and makes reopening easy.

The operating range runs from -29 °C to +60 °C, from cargo-hold storage to a sunlit worksite. The MIL-STD-810F, ATA 300 and FED-STD-101C certifications validate resistance to professional transport stresses: vibration, drops and repeated handling. For sensitive equipment (optics, electronics, metrology), this combination limits moisture and impact risk on the move.

Choosing your configuration: foam or bare interior

The case comes in several configurations, depending on whether you cushion the gear in pre-cut foam or in a custom fit-out:

Reference	Colour	Interior	Recommended use
SEP-MSP-IME3100	Black	No foam	Custom fit-out, panels
SEP-MSP-IM3100	Black	Pre-cut foam	Instant cushioning, maximum protection
SEP-MSP-IME3100K	Green	No foam	Visual identification, field use

The foam can be custom-machined to hold each item in its own recess.

Locking and personalising the waterproof case

Two reinforced 9 mm lugs let you seal the case with a security padlock or a cable seal that records any opening. At the workstation, a wall anchor holds the case in place.

The shell is fully customisable: logo marking, cushioning, machined panels and custom foam.

Rugged and lockable, the long waterproof protective case fits neatly into your equipment-protection setup.

FAQ

Is the long waterproof case resistant to water and dust?▾

Yes. The perimeter O-ring and the Vortex valve keep out dust and moisture, and protect the contents from rain and splashes. An IP rating is not specified for this size: for prolonged immersion, ask us to confirm before ordering.

What can you carry in the 101x17x42 cm format?▾

Its 92.7 cm of usable length suits long, flat equipment: tripods, antenna masts, lighting stands, rules and profiles, measuring instruments. The 15.2 cm depth fits slim gear.

How do you lock the waterproof case?▾

Two reinforced 9 mm lugs take a padlock or a cable seal. A seal records any unauthorised opening during transport.

Can you customise the inside of the case?▾

Yes. The foam can be custom-machined, with panels and cushioning, and the shell marked with your logo to identify the case.

Long waterproof protective case 101x17x42 cm

HPX resin, Vortex valve, MIL-STD-810F. From €674 excl. VAT, lifetime guarantee.

View waterproof hard cases →

Price: From €674.00 to €934.00 excl. VAT
Unit: The briefcase
Conditioning: Individually
Guarantee: Lifetime (excluding sealing gasket)
External length (cm): 101.092
Largeur extérieure (cm): 41.91
External height (cm): 17.018
Inside length (cm): 92.71
Largeur intérieure (cm): 35.56
Internal height (cm): 15.24
Body material: Injection Molded HPX™ high performance resin
Minimum temperature (C°): - 28.8888888888889
Maximum temperature (C°): 60
Weight with foam (kg): 8.9811216
Depth of inner lid (cm): 05.08
Depth of inner base (cm): 10.16
Certification: MIL-STD-810F / ATA 300 / FED-STD-101C
Weight without foam (kg): 6.8945984

Reference SEP-MSP-IME3100

EAN13 825494031572

Choose product attributes:

Ref.	Color	Interior	Unit price
SEP-MSP-IME3100	Black	Without foam	5+ €924.00 10+ €808.80
SEP-MSP-IM3100	Black	With foam	5+ €1,034.40 10+ €904.80
SEP-MSP-IME3100K	Green	Without foam	5+ €924.00 10+ €808.80