protective carrying case sixty two centimetres long closed colour black

sixty two centimetre long open protective carrying case with foam

protective carrying case sixty two centimetres long closed colour green

protective transport case sixty two centimeters long closed black with pre-cut foam

sixty two centimetre long open protective carrying case with yellow dividers

protective carrying case sixty two centimetres long closed colour yellow

ockable, shockproof waterproof case: 62×30×50 cm

From €675.00 to €983.00 excl. VAT (?)

The briefcase

Waterproof (O-ring)
Key-lockable
Shockproof HPX™ resin
MIL-STD-810F certified
Large capacity
Lifetime guarantee

Color

Interior

Quantity (The briefcase)

Total : €1,004.40 excl. VAT

Delivery

Guarantees

✔️ In stock
Shipped within 15 days

The 62×30×50 cm waterproof protective case protects bulky, sensitive equipment in an HPX™ resin shell that is both light and highly resistant. Its four Press & Pull latches and two built-in key locks close it under lock, while the O-ring keeps water and dust out. Inside, foam holds the gear in place; two reinforced rings let you seal it with a padlock. Guaranteed for life, in black, green or yellow.

What the 62×30×50 waterproof case protects

One of the large formats in the waterproof hard case range, made for bulky equipment.

→ HPX™ resin shell - light and highly resistant to impact and handling.
→ O-ring sealing - keeps water and dust out.
→ Four Press & Pull latches - clean, effortless opening and closing.
→ Two built-in key locks - the case locks directly.
→ Two reinforced 9 mm rings - to seal it with a padlock or tether it to a fixed point.
→ Inner foam - holds the gear; a no-foam version is also available.

A large lockable, sealable case

This format stands out for its closing security. On top of the four Press & Pull latches come two built-in key locks, then two reinforced 9 mm rings that take a padlock or a cable seal. You can lock the case, seal it for a chain-of-custody transport, or tether it to a fixed support - a table, a vehicle boot, a counter - by running a cable through the padlock. It is the case to choose when the contents must travel under lock and key.

Large capacity for sensitive equipment

The usable volume (about 56 × 43 × 25 cm) takes fragile technical gear, instruments, electronics or valuables. The supplied moulded foam holds the contents; a no-foam version leaves full latitude for a custom fit.

This case fits into a wider property security approach, alongside the hard carrying case and safe protective case ranges.

MIL-STD-810F certified resistance

The shell is tested against demanding standards - MIL-STD-810F, ATA 300 and FED-STD-101C - a mark of endurance under intensive transport. The HPX™ resin copes with a temperature range of −29 to +60 °C and the reinforced hinges withstand repeated opening. For smaller loads, the microcase range covers pocket formats.

Colours and customisation

The case comes in black, green or yellow, with or without foam. Like the rest of the range, it can be customised: logo marking, made-to-measure foam machining, padding or a machined plate to install connectors. The guide successfully print your logo covers what to prepare.

Frequently asked questions about the 62×30×50 waterproof case

What is the usable internal size?

About 56 × 43 × 25 cm, for external dimensions of 62 × 50 × 30 cm.

How does it lock?

Through four Press & Pull latches and two built-in key locks; two reinforced 9 mm rings also let you add a padlock or a seal.

Is it really waterproof?

It closes on an O-ring that keeps water and dust out, for transport in tough conditions.

Which colours and options?

Black, green or yellow, with or without foam; customisation available (marking, custom foam, plate).

What is the guarantee?

The case carries a lifetime guarantee, excluding the sealing gasket.

Price: From €675.00 to €983.00 excl. VAT
Unit: The briefcase
Conditioning: Individually
Guarantee: Lifetime (excluding sealing gasket)
External length (cm): 62.484
Largeur extérieure (cm): 50.038
External height (cm): 29.718
Inside length (cm): 55.88
Largeur intérieure (cm): 43.18
Internal height (cm): 25.4
Body material: Injection Molded HPX™ high performance resin
Minimum temperature (C°): - 28.8888888888889
Maximum temperature (C°): 60
Weight with foam (kg): 9.979024
Depth of inner lid (cm): 05.08
Depth of inner base (cm): 20.32
Certification: MIL-STD-810F / ATA 300 / FED-STD-101C
Weight without foam (kg): 7.6203456

Reference SEP-MSP-IME2720

EAN13 825494031251

Choose product attributes:

Ref.	Color	Interior	Unit price
SEP-MSP-IME2720	Black	Without foam	5+ €926.40 10+ €810.00
SEP-MSP-IM2720	Black	With foam	5+ €1,088.40 10+ €952.80
SEP-MSP-IME2720K	Green	Without foam	5+ €926.40 10+ €810.00
SEP-MSP-IM2720J	Yellow	With foam	5+ €1,088.40 10+ €952.80