• New
Zebra TC22 TC27 fast-charge Type-C cable | SBE Direct
Zebra TC22 TC27 fast-charge Type-C cable | SBE Direct

USB-C to USB-C 1 m cable for Zebra TC22 / TC27 terminals and cradles

(?)
The cable
  • Two uses, one cable
  • One metre long
  • SuperSpeed USB 3.0
  • Fast charging supported
  • Sold on its own
Quantity (The cable)
Total : €15.60 excl. VAT

Product available for orders
 

The USB-C to USB-C 1 m cable for Zebra TC22 / TC27 earns its place twice. Plugged straight into the terminal, it handles fast charging and SuperSpeed USB 3.0 data transfer. Wired to the charging cradle, it becomes the link between that cradle and its mains adapter. One accessory therefore covers mobile charging and a fixed workstation, at the price of a cable.

One Cable, Two Jobs

It is the only cable in the Zebra range to hold both roles at once.

  • →Straight to the terminal: fast charging and data transfer between a Zebra TC22 or TC27 terminal and a workstation.
  • →Between cradle and adapter: this is the intended link for powering the 1-slot charging cradle.
  • →SuperSpeed USB 3.0: transfer rate suited to end-of-round data uploads.
  • →One metre: long enough to reach a workstation, short enough not to tangle.
  • →USB-C at both ends: no intermediate adapter needed on the terminal side.
  • →Sold on its own: single unit, 1-year warranty, with no power supply or accessory in the box.

Fast Charging and SuperSpeed Transfer on Zebra TC22 / TC27

Connected to a computer, this cable opens the data link on a Zebra TC22 or TC27 terminal: uploading scans collected on a round, pushing an application update, preparing a device before it goes to an operator. SuperSpeed USB 3.0 keeps those steps from becoming a wait.

Connected to a power supply, it supports fast charging of the terminal. That makes it the fallback when a cradle is busy, and the primary option on a site running only one or two devices.

USB-C cable connected to a Zebra TC27 terminal at a control post

Linking Cradle and Adapter at a Fixed Post

The second job is less visible and just as useful. The 1-slot charging cradle ships bare, with no cable and no power supply. This cable is what connects it to its USB-C power adapter, whose own product page confirms the match.

In practice, equipping a post takes three references: the cradle, this cable, the adapter. And if the post changes, the cable stays usable on its own with the terminal. Nothing is wasted.

Which Cable for Which Terminal in the Catalogue

Three cables sit side by side and are not interchangeable. This table prevents the wrong order.

Terminal in serviceDedicated cableConnectors
Zebra TC22 and TC27This cable, 1 mUSB-C to USB-C
Zebra TC22RDedicated TC22R cable, 1 mUSB-A to USB-C
Honeywell ScanPal EDA52ScanPal EDA52 cableUSB-C, with power brick and plug adapters

The other two references are here: USB-A to USB-C cable for TC22R and ScanPal EDA52 USB-C cable. The wider range sits under RFID accessories.

Planning Cables Across a Zebra TC22 / TC27 Fleet

USB-C to USB-C 1 m cable for Zebra TC22 / TC27 on a worktop

One cable per equipped post, plus a few spares: that is the simplest count. At this price a stockout always costs more than the stock, and a terminal idled for want of a cable blocks a whole stock management operation.

On a fleet that centralises charging in one room, the five-slot charging station changes the maths: one power point for five devices, so fewer cables overall. Assigned posts keep their own.

Wear matters too. Where devices get dropped, the rugged protective case protects the terminal but not the cable, which stays the consumable part of the setup. The rest of the range sits under RFID readers.

Frequently Asked Questions

Does this cable work with the Zebra TC22R?▾

No. The TC22R has its own cable in the catalogue, in USB-A to USB-C. Always start from the exact reference of the terminal in service.

Can it power the 1-slot charging cradle?▾

Yes, that is one of its two jobs. It links the cradle to its USB-C power adapter, whose product page states compatibility with a USB-C to USB-C cable.

Does the cable come with a power supply?▾

No, it is sold on its own, as a single unit. The mains adapter is a separate catalogue reference.

How long is the cable?▾

One metre, enough to reach a workstation or to link a cradle to its power supply without slack across the desk.

How many cables should we plan for a fleet?▾

One per equipped post, plus a few spares. For volume pricing, our technical team answers through a quotation request.

Unsure which reference to order?

Tell us the terminal model in service and our technical team confirms the right cable.

Request a quotation →
Unit
The cable
Conditioning
Individually
Guarantee
1 year
Zebra

Choose product attributes:

Ref. Unit price Buy
ACC-TC2-USB
1+
€15.60
ACC-TC2-USBC
1+
€21.60

You might also like

Customers who bought this product also bought:

We use cookies to improve your experience.