Fast charging for the 1-slot TC22 TC27 cradle | SBE Direct

USB-C power adapter with EU plug for the Zebra TC22 / TC27 cradle

€46.80 excl. VAT (?)

The tip

Auto-ranging USB-C output
USB Power Delivery 3.1
5 V / 3 A to 20 V / 2.25 A
100 to 240 V AC input
European plug included

Quantity (The tip)

Total : €46.80 excl. VAT

Delivery

Product available for orders

The USB-C power adapter with EU plug feeds the 1-slot charging cradle of Zebra TC22 and TC27 terminals. Its USB Power Delivery 3.1 technology adjusts the output voltage automatically between 5 and 20 volts, according to what the connected equipment asks for. It is the only power supply in the catalogue with a USB-C output, which sets it apart from the other three at a glance.

What USB Power Delivery Brings to a Cradle

A fixed-voltage supply always delivers the same thing. This one adapts.

→Auto-ranging output: voltage moves from 5 V / 3 A to 20 V / 2.25 A according to demand.
→USB Power Delivery 3.1: the protocol through which supply and device agree on the power to be delivered.
→USB-C connector: the distinguishing mark of this reference, as the catalogue's three other supplies output differently.
→100 to 240 V AC, 50 to 60 Hz input: it takes the mains voltages and frequencies in common use.
→European plug: it goes straight into an installation built to French standards.
→Made for the 1-slot cradle: it feeds the charging cradle of Zebra TC22 and TC27, not the terminal directly.

An Output That Ranges from 5 to 20 Volts

A conventional supply imposes its voltage. The connected equipment takes what it is given, and sizing is settled once and for all at purchase.

Power Delivery reverses that. Supply and device negotiate the power when the link is established, and voltage ranges between 5 and 20 volts according to what is asked. The cradle gets what it needs, no more and no less, and charging is both faster and steadier for it.

For a Zebra TC22 or TC27 terminal returning to its post several times a day, that behaviour translates simply: the device is ready sooner, and the supply is not working needlessly between charges.

Telling This Supply Apart from the Catalogue's Other Three

The category holds four power supplies for Zebra equipment, and their names are alike enough for a buyer to slip. One criterion settles it: the output.

This one outputs USB-C. The 12 V power brick outputs 12 V on a dedicated connector and feeds the battery chargers. The 5V 2.5A power supply outputs USB-A and feeds the TC22R terminal. The RFD40 power brick serves the RFD40 readers' charging setup.

So the habit to build is one question: which socket is on your equipment? The answer names the supply, with no need to compare product names.

Completing a TC22 / TC27 Charging Post

A complete charging post is made of three references. The 1-slot charging cradle takes the terminal, this adapter supplies the current, and the USB-C to USB-C cable links the two. The adapter's own product page states that compatibility, as does the cradle's.

Count one set per post equipped. A site installing three cradles across three areas needs three adapters and three cables, as supplies are not shared between distant posts.

On a stock management operation where every post has its assigned terminal, that set of three references is the unit to order. The rest of the range sits under RFID readers.

Frequently Asked Questions

Which equipment does this adapter power?▾

The 1-slot charging cradle of Zebra TC22 and TC27 terminals. It does not power the terminal directly, nor the battery chargers, which have their own references.

What does an auto-ranging output mean?▾

USB Power Delivery 3.1 lets the supply and the equipment agree on the power to be delivered. Voltage then moves from 5 V / 3 A to 20 V / 2.25 A according to demand, rather than staying fixed.

How do I tell it from the catalogue's other supplies?▾

By its output, which is USB-C. The other three output 12 V on a dedicated connector, USB-A, or serve the RFD40 setup. The socket on your equipment names the supply to order.

Is a cable included?▾

No. The USB-C to USB-C cable is a separate catalogue reference, and it is needed to link the adapter to the cradle.

How many adapters should we plan for?▾

One per cradle installed, each with its cable. Supplies are not shared between distant posts. For volume pricing, our technical team answers through a quotation request.

Price: €46.80 excl. VAT
Unit: The tip
Conditioning: Individually
Guarantee: 1 year

Brand Zebra