open case for transporting fragile objects with security eyelet

closed case for transporting fragile objects with security eyelet

Foam-lined waterproof case 80x31x52 cm

From €741.00 to €1068.00 excl. VAT (?)

The briefcase

Deep foam-lined interior
21.6 cm base depth
Rigid HPX resin shell
2 integrated key locks
MIL-STD-810F rated
Lifetime manufacturer warranty

Color

Interior

Quantity (The briefcase)

Total : €1,101.60 excl. VAT

Delivery

✔️ In stock
Shipped within 15 days

The foam-lined waterproof case 80x31x52 cm protects bulky equipment and valuables in a deep 26.7 cm interior. Its pre-cut foam holds each item snugly, while the HPX resin shell and perimeter seal keep out water, dust and impact. Two integrated key locks and two reinforced 9 mm rings secure the contents in transit. Rated to MIL-STD-810F, ATA 300 and FED-STD-101C, it stands up to the most demanding transport.

Foam-lined waterproof case: what the 80x31x52 format holds

Built for thick equipment and valuables, this case relies on depth and foam cushioning. Its key features:

→Deep interior: 73.7 x 45.7 cm usable area and 26.7 cm depth, including 21.6 cm in the base.
→Pre-cut foam: immediate cushioning, machinable to order for each item.
→HPX resin shell: rigid and stable from -29 °C to +60 °C.
→Perimeter seal: keeps out water, dust and moisture when closed.
→5 Press & Pull latches and 2 key locks: quick opening, lockable closure.
→2 reinforced 9 mm rings: fit a padlock or a cable seal.
→MIL-STD-810F, ATA 300 and FED-STD-101C certifications: proven professional transport.

Deep waterproof case for bulky equipment

The foam-lined waterproof case answers a simple need: moving thick equipment with no play and no contact.

With 26.7 cm of internal depth, including 21.6 cm in the base, it takes the gear flat formats leave behind: cameras and optics, measuring instruments, tools, audiovisual or IT equipment.

The pre-cut foam holds each item in its recess. This size rounds out the waterproof hard cases range where depth matters more than length, between the hard carrying case range and the more compact models.

Choosing your 80x31x52 case: without foam or with pre-cut foam

Whether you cushion the gear in ready-to-use foam or in a clean layout, the case comes in two configurations:

Configuration	Reference	Interior	Recommended use
Without foam	SEP-MSP-IME2950	Bare shell	Custom fit-out, base plates
With foam	SEP-MSP-IM2950	Pre-cut foam	Immediate cushioning, maximum protection

The foam can be machined to order to match the shape of each piece of equipment.

Sealing, HPX resin and transport certifications

Sealing relies on a perimeter gasket that presses the lid onto the body when closed. It blocks water, dust and moisture, and protects the contents from splashes and rain.

The HPX resin shell stays rigid under load and absorbs handling impact. It operates from -29 °C to +60 °C, from hold storage to a sunny worksite.

The MIL-STD-810F, ATA 300 and FED-STD-101C certifications confirm resistance to the demands of professional transport: vibration, drops and repeated handling. For sensitive equipment, this combination limits moisture and impact risk in transit. The IP rating is not specified for this model: for immersion, please ask for confirmation before ordering.

Key locking and customisation of the waterproof case

Two integrated key locks close the case with no extra hardware. To go further, two reinforced 9 mm rings take a padlock or a cable seal that records any opening.

At the workstation, a wall anchor secures the case in place. The shell can be customised: logo marking, padding, machined base plates and made-to-measure foam.

For a length rather than depth requirement, the long waterproof case 101x17x42 rounds out the range, and matching padlocks secure the whole case.

Foam-lined waterproof case 80x31x52 cm

Deep interior, HPX resin, MIL-STD-810F. From €741 excl. VAT, lifetime warranty.

View waterproof cases →

FAQ

Is the 80x31x52 waterproof case water and dust resistant?▾

Yes. The perimeter gasket presses the lid onto the body and blocks water, dust and moisture. The contents stay protected from splashes and rain. The IP rating is not stated for this model: for prolonged immersion, please ask for confirmation before ordering.

What fits in the 80x31x52 cm format?▾

Its 73.7 x 45.7 cm interior and 26.7 cm depth take thick gear: cameras and optics, measuring instruments, tools, audiovisual or IT equipment. The pre-cut foam cushions each item.

Should I choose the version with or without foam?▾

The version with foam (SEP-MSP-IM2950) gives immediate cushioning. The version without foam (SEP-MSP-IME2950) leaves room for a clean fit-out or base plates. The foam can be machined to order in both cases.

How is the waterproof case locked?▾

Two integrated key locks close the case. Two reinforced 9 mm rings also take a padlock or a cable seal, which records any unauthorised opening in transit.