Panneau danger picto matières explosives

Explosive materials warning sign, ISO 7010 for storage areas and ATEX sites

From €32.00 to €53.00 excl. VAT (?)

The panel

ISO 7010 / MFX 08003 compliant
Ten materials to choose
Two triangular formats
Photoluminescent version available
Magnetic option, no drilling
Silkscreen, solvent resistant

Material

Format

Quantity (The panel)

Total : €38.40 excl. VAT

Delivery

✔️ In stock
Shipped within 7 days

The explosive materials warning sign flags the presence of products that can explode across storage areas, depots and sites exposed to an explosion risk. Its yellow triangular shape and ISO 7010 compliant pictogram are read at a glance at the entrance of a room, on a storage door or at the edge of a controlled zone. Available in ten materials, from PVC to aluminium Dibond and photoluminescent, it fits every wall and every environment. Made to order and silkscreen printed, it keeps stable colours indoors and outdoors, standing up to oils and solvents.

Explosive materials warning sign: the key points

→ Explosion risk signalling : the pictogram warns of explosive materials at the entrance of rooms and zones.
→ Standard compliance : the artwork follows ISO 7010 and the MFX 08003 ISO 6790/7010 nomenclature.
→ Ten materials available : PVC, aluminium Dibond, Plexiglas, photoluminescent or vinyl.
→ Two triangular formats : 100 mm or 200 mm sides, for close reading or reading from a distance.
→ Silkscreen printing : colours stay stable and resist oils and solvents.
→ Made to order : format and artwork can be adapted on request.

Marking explosive materials storage

On a site that stores explosive materials, access to rooms and hazard zones must be signalled without ambiguity. This explosive materials warning sign marks that danger at the entrance of depots and along walkways. Placed in clear view, it reminds teams and visitors of the access and prohibition rules that apply. It sits naturally within the range of yellow warning and hazard signs used across industrial and logistics sites.

Choosing the material of the hazard sign

The right material depends on where the sign goes and how long it stays. PVC 1 or 2 mm suits a permanent, cost effective indoor display. Aluminium Dibond 3 mm lasts outdoors on a storage door or a weather exposed façade. Plexiglas 4 mm brings a rigid finish in office environments.

For low light areas or sites prone to power cuts, the photoluminescent version stays visible in the dark. Adhesive vinyl fits a smooth existing surface, while magnetic vinyl 0.8 mm mounts and removes without drilling on a metal support. This chemical hazard logic mirrors the combustive materials danger sign and the suspended loads warning sign within the same yellow hazard range.

Formats and materials: which version for which use

Material	Recommended use
PVC 1 or 2 mm	Permanent indoor display, cost effective
Aluminium Dibond 3 mm	Durable outdoors, storage doors and façades
Plexiglas 4 mm	Rigid finish in office settings
Photoluminescent 1 mm	Dark areas and power cuts
Adhesive vinyl 0.25 mm	Mounting on a smooth existing surface
Magnetic vinyl 0.8 mm	Removable, no drilling, on metal

Completing your safety signage on a hazardous site

A hazardous materials depot is rarely secured with a single pictogram. Depending on the risks, pair the explosive materials sign with the electrical cable warning sign or the laser radiation danger sign. For a need outside the standard catalogue, specific signs let you adapt the format or artwork, part of our wider people security solutions.

Explosive materials warning sign FAQ

Is the explosive materials sign ISO 7010 compliant?

Yes. The pictogram follows ISO 7010 and the MFX 08003 ISO 6790/7010 nomenclature, which unify safety symbols and colours. The yellow triangular shape is the code for a warning sign.

Which material should I choose for outdoor use?

For outdoor use, aluminium Dibond 3 mm is the most durable against the weather. The photoluminescent version is recommended in low light areas. Magnetic vinyl suits a removable fit on a metal support.

What sizes of explosive materials sign are available?

The sign comes in two triangular formats, with 100 mm or 200 mm sides. The 200 mm format reads from a distance at a zone boundary, while the 100 mm format suits close display on a door or a room.

Can this sign be customised?

Yes, it can be made to order on request. For a format or artwork outside the catalogue, specific signs offer full customisation of the material and marking.

Price: From €32.00 to €53.00 excl. VAT
Unit: The panel
Conditioning: Individually
Guarantee: 1 year
Printing: Silkscreen
Printing resistance: Excellent
General resistance: Oils / Solvents
Form: Triangular
Color: Yellow
Certification: ISO 7010 standard: graphic symbols and safety signal colors

Brand SBE

Reference SP-CS-722-PP1

EAN13 3701053905898

Choose product attributes:

Ref.	Material	Format	Unit price
SP-CS-722-1-DOB	Dibond Alu Brosse 3 mm	200x200x200mm	1+ €63.60
SP-CS-722-1-DAB	Dibond Alu Or 3 mm	200x200x200mm	1+ €63.60
SP-CS-722-1-DB	Dibond Alu blanc 3 mm	200x200x200mm	1+ €57.60
SP-CS-722-PP1	PVC 1 mm	100x100x100mm	1+ €38.40
SP-CS-722-1-PP1	PVC 1 mm	200x200x200mm	1+ €43.20
SP-CS-722-PP2	PVC 2 mm	100x100x100mm	1+ €39.60
SP-CS-722-1-PP2	PVC 2 mm	200x200x200mm	1+ €45.60
SP-CS-722-1-PH	Photoluminescent 1 mm	200x200x200mm	1+ €52.80
SP-CS-722-1-PG	Plexiglas 4 mm	200x200x200mm	1+ €57.60
SP-CS-722-VB	Vinyle Blanc 0,25 mm	100x100x100mm	1+ €38.40
SP-CS-722-1-VB	Vinyle Blanc 0,25 mm	200x200x200mm	1+ €42.00
SP-CS-722-VM	Vinyle Magnétique 0,8 mm	100x100x100mm	1+ €43.20
SP-CS-722-1-VM	Vinyle Magnétique 0,8 mm	200x200x200mm	1+ €55.20
SP-CS-722-VH	Vinyle Photoluminescent	100x100x100mm	1+ €44.40
SP-CS-722-1-VH	Vinyle Photoluminescent	200x200x200mm	1+ €49.20